BL B100 General Building

General Building Contractor. A General Building contractor is a contractor licensed to perform work as defined in Subsection 58-55-102(21) and pursuant to Subsection 58-55-102(21)(b) is clarified as follows:

"General building contractor" means a person licensed under this chapter as a general building contractor qualified by education, training, experience, and knowledge to perform or superintend construction of structures for the support, shelter, and enclosure of persons, animals, chattels, or movable property of any kind or any of the components of that construction except plumbing, electrical work, mechanical work, work related to the operating integrity of an elevator, and manufactured housing installation, for which the general building contractor shall employ the services of a contractor licensed in the particular specialty, except that a general building contractor engaged in the construction of single-family and multifamily residences up to four units may perform the mechanical work and hire a licensed plumber or electrician as an employee.

(b) The division may by rule exclude general building contractors from engaging in the performance of other construction specialties in which there is represented a substantial risk to the public health, safety, and welfare, and for which a license is required unless that general building contractor holds a valid license in that specialty classification.

Open Book These books are allowed while taking your test.
Closed Book These books are for pre-test study only and are not available for use during the test.
In Stock These books are currently in stock.
Out of Stock These books are currently out of stock.

Closed Book In Stock

Technical Digest No. 9 - Handling and Erection of Steel Joists and Joist Girders

3rd Edition
Publication Year: March 2006

$34.25

This updated Technical Digest contains a thorough coverage of the proper handling and erection procedures to be employed in the field to make certain that SJI joist products are not damaged, that they perform as specified, and above all, to ensure the safety of the erectors. The digest includes descriptions of the standard products: K-Series joists, LH/DLH-Series joists, Joist Girders and now CJ-Series joists, how joist products are prepared, tagged, loaded and shipped from the joist manufacturer’s plant, how they are to be unloaded and stored at the job site, how the joist products are to be erected including bridging, and field inspection. Other topics covered in the digest are penalized erection and common field issues. This edition contains information related to the newest standard joist product, the CJ-Series joists that were introduced in 2007. It also includes updated information on Bridging in Chapter 8 as well as some additional topics added to the list of Miscellaneous Topics - Common Field Issues in Chapter 9. General contractors, steel erectors, inspectors, and building officials would most benefit from this Technical Digest. Engineers and Architects would also benefit from the information contained in the digest if part of their responsibilities is to oversee joist and Joist Girder projects under construction.
Closed Book Out of Stock

Pipe and Excavation Contracting

Publication Year: 2011

$38.55

This popular manual has been updated and improved to bring it more current with modern earthmoving and trenching equipment, refined excavation techniques, stricter safety rules, and improved materials. Here you’ll find how to enter and succeed in the underground utility business. Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipelayers to fail when they try to start their own business.
Closed Book Out of Stock

Carpentry and Building Construction

Publication Year: 2010

$125.00

In this reference, carpentry and construction industry standards are fully integrated, and project-based learning is supported with unit-based projects that include technical math. Step-by-step illustrations, photos, and graphs guide students through each key process. Regional applications are studied in Regional Concerns features. Rigorous academic content is supported, especially in math and science, with STEM activities throughout.Estimating and Planning, Job Safety, Builder's Tip and Step-by-Step Applications features and activities help build technical knowledge while students practice the latest techniques, including Build It Green construction tips and activities. .
Open Book Out of Stock

International Residential Code Turbo Tabs 2012

Publication Year: 2012

$17.00

Flip through the 2012 I-Codes series and find frequently used sections fast! You'll be surprised how easy it is to find what you are looking for. These tabs were created by industry experts who carefully identified the most referenced sections in the code.
Closed Book Out of Stock

Contractors Guide to Quality Concrete Construction

3rd Edition
Publication Year: 2005

$68.00

Written by and for contractors, this publication provides insight into proven construction practices that will produce quality concrete construction. Contents include organizing for quality, concrete mixture designs, specifications, foundations, formwork, reinforcement and embedments in structures, joints and reinforcement for slabs-on-ground, preparing for concreting, concrete placing and finishing, common field problems, and safety.
Open Book Out of Stock

International Building Code Turbo Tabs 2012

Publication Year: 2012

$18.00

Flip through the 2012 I-Codes series and find frequently used sections fast! You'll be surprised how easy it is to find what you are looking for. These tabs were created by industry experts who carefully identified the most referenced sections in the code.
Closed Book Out of Stock

Roofing Construction & Estimating

Publication Year: 1995

$38.00

Installation, repair and estimating for nearly every type of roof covering available today in residential and commercial structures: asphalt shingles, roll roofing, wood shingles and shakes, clay tile, slate, metal, built-up, and elastomeric. Covers sheathing and underlayment techniques, as well as secrets for installing leakproof valleys. Many estimating tips help you minimize waste, as well as insure a profit on every job. Troubleshooting techniques help you identify the true source of most leaks. Over 300 large, clear illustrations help you find the answer to just about all your roofing questions.
Closed Book Out of Stock

ACI 530-05 Building Code Requirements for Masonry Structures

Publication Year: 2005

$114.50

Building Code Requirements for Masonry Structures and Specifications for Masonry Structures reflects the latest industry consensus for design and construction of masonry structures. This new Standard has been substantially revised, and many new requirements have been added. Some of the major updates include: Strength design procedures for autoclaved aerated concrete (AAC) masonry; Complete revision in prestressed masonry design philosophy to a strength design basis with service load checks; Revised maximum reinforcement limits for strength design; harmonized splice length requirements for allowable-stress design and strength design; and clarification on limits for empirical design in high wind areas.
Closed Book Out of Stock

Building Code Requirements for Structural Concrete and Commentary

Publication Year: 2005

$142.30

The ACI 318 is a must-have standard for all concrete design, construction, inspection, repair, and research professionals. The ACI 318-05 contains the latest code requirements for concrete building design and construction. The companion commentary is a side-by-side column format to match the corresponding code requirements. The commentary provides some of the considerations of the committee in developing code provisions. This edition of the ACI Building Code is deemed to satisfy the International Organization for Standardization (ISO) 19338, Performance Assessment Requirements for Design Standards on Structural Concrete.
Closed Book Out of Stock

Utah Blue Stake

Publication Year: 2006

$12.00

This excavation guide is an educational document for anyone who plans to excavate, dig, construct or undertake any project that requires disturbing the earth’s surface. Please use it as a reference tool when planning your excavation and when interacting with the one-call notification center at Blue Stakes of Utah Utility Notification Center, Inc. (Blue Stakes). This guide reflects the policy of the Board of Directors at Blue Stakes. It does not have the force and effect of law. The governing law is Utah Code Title 54, Chapter 8a, Damage to Underground Utility Facilities
Closed Book Out of Stock

Instructional Manual for Training and Certification of Steel Personnel

Publication Year: 1999
3rd Edition

$91.56

This instructional manual has been prepared by the Post-Tensioning Institute's Committee for Training and Certification of Field Personnel for Unbonded Post-Tensioning soley as a recommended general guide and assistance to the placement, installation and inspection of unbonded single strand post-tensioning systems, the operation of stressing equipment, and accessories.
Open Book Out of Stock

Utah Amendments to Code Books

$15.00

• 2012 edition of the International Building Code (IBC), to include Appendix J, Issued by the International Code Council.
• 2011 edition of the National Electrical Code (NEC), issued by the National Fire Protection Association.
• 2012 edition of the International Plumbing Code (IPC), issued by the International Code Council.
• 2012 edition of the International Mechanical Code (IMC), issued by the International code Council.
• 2012 edition of the International Residential Code (IRC), Issued by the International Code Council.
• 2009 edition of the International Energy Conservation Code (IECC), issued by the International Code Council.
• 2012 edition of the International Fuel Gas Code (IFGC), issued by the International Code Council.
Open Book Out of Stock

International Residential Code for One and Two Family Dwellings 2012

Publication Year: 2012

$118.00
Closed Book Out of Stock

Utah Water Quality, Title R317-4, Onsite Wastewater Systems

$10.00
Closed Book Out of Stock

Gypsum Construction Handbook 2014

Publication Year: 2014

$57.25

The tried-and-true Gypsum Construction Handbook is a systematic guide to selecting and using gypsum drywall, veneer plaster, tile backers, ceilings, and conventional plaster building materials. A widely respected training text for aspiring architects and engineers, the book provides detailed product information and efficient installation methodology. The Seventh Edition features updates in gypsum products, including ultralight panels, glass-mat panels, paperfaced plastic bead, and ultralightweight joint compound, and modern specialty acoustical and ceiling product guidelines. This comprehensive reference also incorporates the latest in sustainable products.
Closed Book Out of Stock

Modern Masonry - Brick, Block, Stone 8th Edition

Publication Year: 2015
8th Edition

$84.50

Modern Masonry: Brick, Block, Stone provides a broad understanding of the properties and applications of masonry materials. It then progresses to teaching safe and proper procedures for working with brick, block, and stone. Coverage of concrete form construction and flatwork is also included. Green features address specific topics relating to masonry's impact on the environment. New supplemental teaching materials include PowerPoint presentations and test creation software. Code features reference the International Residential Code and International Building Code, familiarizing students with their requirements. Updated, color images have been added throughout the text to reinforce chapter topics. Over 75 illustrated step-by-step procedures guide student learning.
Closed Book Out of Stock

Carpentry & Building Construction, 2016 Student Edition

Publication Year: 2016

$112.54
Open Book Out of Stock

a new test product for Utah

$7.00

this is a test product for Utah