E100 General Engineering

General Engineering Contractor. A General Engineering contractor is a contractor licensed to perform work as defined in Subsection 58-55-102(22)(a) "General engineering contractor" means a person licensed under this chapter as a general engineering contractor qualified by education, training, experience, and knowledge to perform construction of fixed works in any of the following: irrigation, drainage, water, power, water supply, flood control, inland waterways, harbors, railroads, highways, tunnels, airports and runways, sewers and bridges, refineries, pipelines, chemical and industrial plants requiring specialized engineering knowledge and skill, piers, and foundations, or any of the components of those works.
(b) A general engineering contractor may not perform construction of structures built primarily for the support, shelter, and enclosure of persons, animals, and chattels.

Open Book These books are allowed while taking your test.
Closed Book These books are for pre-test study only and are not available for use during the test.
In Stock These books are currently in stock.
Out of Stock These books are currently out of stock.

Open Book Out of Stock

ASME B31.8 Gas Transmission and Distribution Systems

Publication Year: 2007

$248.55

This Code prescribes comprehensive solutions for materials, design, fabrication, assembly, erection, testing and inspection. It also serves as a companion to ASME's other B31 codes on piping systems. Together, they remain essential references for anyone engaged with piping.
Closed Book In Stock

Technical Digest No. 9 - Handling and Erection of Steel Joists and Joist Girders

3rd Edition
Publication Year: March 2006

$34.25

This updated Technical Digest contains a thorough coverage of the proper handling and erection procedures to be employed in the field to make certain that SJI joist products are not damaged, that they perform as specified, and above all, to ensure the safety of the erectors. The digest includes descriptions of the standard products: K-Series joists, LH/DLH-Series joists, Joist Girders and now CJ-Series joists, how joist products are prepared, tagged, loaded and shipped from the joist manufacturer’s plant, how they are to be unloaded and stored at the job site, how the joist products are to be erected including bridging, and field inspection. Other topics covered in the digest are penalized erection and common field issues. This edition contains information related to the newest standard joist product, the CJ-Series joists that were introduced in 2007. It also includes updated information on Bridging in Chapter 8 as well as some additional topics added to the list of Miscellaneous Topics - Common Field Issues in Chapter 9. General contractors, steel erectors, inspectors, and building officials would most benefit from this Technical Digest. Engineers and Architects would also benefit from the information contained in the digest if part of their responsibilities is to oversee joist and Joist Girder projects under construction.
Closed Book Out of Stock

Pipe and Excavation Contracting

Publication Year: 2011

$38.55

This popular manual has been updated and improved to bring it more current with modern earthmoving and trenching equipment, refined excavation techniques, stricter safety rules, and improved materials. Here you’ll find how to enter and succeed in the underground utility business. Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipelayers to fail when they try to start their own business.
Closed Book Out of Stock

Placing Reinforcing Bars, Recommended Practices

9th Edition
Publication Year: 2011

$70.12

More then any other material of construction, concrete depends for its performance on the skill and understanding of the man on the job. Since this applies particularly to reinforced concrete construction, it will be a matter of great interest to all contractors a now handbook entitled "CRSI Recommended Practice for Placeing Reinforcing Bars." The book was prepared under the direction of the Engineering Proactive Committee of the Concrete Reinforcing Steel Institute by R. C. Reese. The book answers hundreds of questions. Some examples are: how many standard sizes of reinforcing bars are now being rolled; what are stirrups and why are they used; why are column spirals used and related issues.
Closed Book Out of Stock

Hot-Mix Asphalt Paving Handbook

2nd Edition
Publication Year: 2000

$41.78

This second edition covers state-of-the-art asphalt paving, plant operations, transportation of materials, surface preparation, lay down, compaction, and quality control processes. It is aimed at field personnel who are responsible for these operations—both contractor personnel who do the work and agency personnel who oversee and inspect the work.
Closed Book Out of Stock

Contractors Guide to Quality Concrete Construction

3rd Edition
Publication Year: 2005

$68.00

Written by and for contractors, this publication provides insight into proven construction practices that will produce quality concrete construction. Contents include organizing for quality, concrete mixture designs, specifications, foundations, formwork, reinforcement and embedments in structures, joints and reinforcement for slabs-on-ground, preparing for concreting, concrete placing and finishing, common field problems, and safety.
Closed Book Out of Stock

Construction Planning, Equipment, and Methods

Publication Year: 2005
7th Edition

$196.54

The 8th Edition of Construction Planning, Equipment and Methods follows in the footsteps of the previous editions by providing the reader with the fundamentals of machine utilization and production estimating in a logical, simple and concise format. This text is aimed at supporting a basic undergraduate construction equipment course that is part of an engineering curriculum. It is also applicable to graduate equipment courses. In addition, since technology is constantly evolving, this text provides an understanding of machine capabilities and how to properly apply those capabilities to construction challenges.
Closed Book Out of Stock

Training Certification of Field Personnel For Unbonded Post Tensioning

3rd Edition
Publication Year: 2003

$91.56

This instructional manual has been prepared by the Post-Tensioning Institute's Committee for Training and Certification of Field Personnel for Unbonded Post-Tensioning soley as a recommended general guide and assistance to the placement, installation and inspection of unbonded single strand post-tensioning systems, the operation of stressing equipment, and accessories.
Closed Book Out of Stock

Utah Blue Stake

Publication Year: 2006

$12.00

This excavation guide is an educational document for anyone who plans to excavate, dig, construct or undertake any project that requires disturbing the earth’s surface. Please use it as a reference tool when planning your excavation and when interacting with the one-call notification center at Blue Stakes of Utah Utility Notification Center, Inc. (Blue Stakes). This guide reflects the policy of the Board of Directors at Blue Stakes. It does not have the force and effect of law. The governing law is Utah Code Title 54, Chapter 8a, Damage to Underground Utility Facilities
Closed Book Out of Stock

DIPRA Installation Guide for Ductile Iron Pipe

Publication Year: 2015

$0.00

This book is full of useful information for designers and installers of Ductile Iron pipe. It covers many aspects of pipeline installation such as receiving and handling, trenching, installing, back-filling, testing and disinfecting, and service taps. It also contains a variety of useful miscellaneous information such as a listing of Ductile Iron pipe standards, common conversion factors and dimensions, and weights of push-on and mechanical joint pipe. A convenient pocket-size version of this Guide is available.
Open Book Out of Stock

Utah Amendments to the International Plumbing Code

$15.00
Closed Book Out of Stock

Manual on Uniform Traffic Control Devices

Publication Year: 2009

$138.00

The Manual on Uniform Traffic Control Devices, or MUTCD defines the standards used by road managers nationwide to install and maintain traffic control devices on all public streets, highways, bikeways, and private roads open to public traffic. The MUTCD is published by the Federal Highway Administration (FHWA) under 23 Code of Federal Regulations (CFR), Part 655, Subpart F.
Closed Book Out of Stock

National Electrical Safety Code

Publication Year: 2007

$169.05

This book covers basic provisions for safeguarding of persons from hazards arising from the installation, operation, or maintenance of 1) conductors and equipment in electric supply stations, and 2) overhead and underground electric supply and communication lines. It also includes work rules for the construction, maintenance, and operation of electric supply and communication lines and equipment. This book is applicable to the systems and equipment operated by utilities, or similar systems and equipment, of an industrial establishment or complex under the control of qualified persons. This book consists of the introduction, definitions, grounding rules, list of referenced and bibliographic documents, and Parts 1, 2, 3, and 4 of the 2007 Edition of the National Electrical Safety Code.
Closed Book Out of Stock

Pipe Welding Procedures

2nd Edition
Publication Year: 2003

$50.78

A standard reference for decades, this new edition of Pipe Welding Procedures continues to reinforce the welder's understanding of procedures. Drawing on his extensive practical and teaching experience in the field, the author describes in detail the manipulating procedures used to weld pipe joints. You will find useful information on heat input and distribution, essentials of shielded metal-arc technology, distortion, pipe welding defects, welding safety, essentials of welding metallurgy, and qualification of the welding procedure and the welder.
Closed Book Out of Stock

Pipefitter's Handbook

3rd Edition
Publication Year: 1967

$35.45

Compact and pocket-sized, this handy reference contains thousands of facts and figures relevant to pipefitters, steamfitters-anyone concerned with layout and installation of pipe.
Closed Book Out of Stock

Utah Department of Transportation Standard Specifications For Road and Bridge Construction

2012 Edition

$25.00
Closed Book Out of Stock

Lineman's and Cableman's Handbook

Publication Year: 2011
12th Edition

$103.50

The definitive guide to distribution and transmission line technology
Open Book Out of Stock

International Plumbing Code Turbo Tabs 2012

Publication Year: 2012

$12.00

Flip through the 2012 I-Codes series and find frequently used sections fast! You'll be surprised how easy it is to find what you are looking for. These tabs were created by industry experts who carefully identified the most referenced sections in the code.
Open Book Out of Stock

International Plumbing Code 2012

Publication Year: 2012

$74.60

With an emphasis on design and installation for optimum performance, the 2012 INTERNATIONAL PLUMBING CODE SOFTBOUND VERSION sets forth established requirements for plumbing systems. This important reference guide includes provisions for fixtures, piping, fittings, and devices, as well as design and installation methods for water supply, sanitary drainage, and storm drainage. The 2012 edition of the code includes the 2012 INTERNATIONAL PRIVATE SEWAGE DISPOSAL CODE, a companion guide that offers additional provisions for the design, installation, and inspection of private sewage disposal systems. Using both prescriptive- and performance-related specifications, this code provides comprehensive minimum regulations for a variety of plumbing facilities, facilitating the design and acceptance of new and innovative products, materials, and systems.
Closed Book Out of Stock

Concrete Pipe and Box Culvert Installation Manual 2015

Publication Year: 2015

$25.00