MS-12J Journeyman Fire Protection Systems (2013-05-08)

This standard provides a range of sprinkler system approaches, design development alternatives, and component options that are all acceptable. Building owners and their designated representatives are advised to carefully evaluate proposed selections for appropriateness and preference. 1.1.1 This standard shall provide the minimum requirements for the design and installation of automatic fire sprinkler systems and exposure protection sprinkler systems covered within this standard. 1.1.2 This standard is written with the assumption that the sprinkler system shall be designed to protect against a single fire originating within the building.

1.1 Scope. 1.1.1 NFPA 72 covers the application, installation, location, performance, inspection, testing, and maintenance of fire alarm systems, supervising station alarm systems, public emergency alarm reporting systems, fire warning equipment and emergency communications systems (ECS), and their components. 1.1.2 The provisions of this chapter apply throughout the Code unless otherwise noted

This standard shall cover the design and installation of automatic sprinkler systems for protection against fire hazards in residential occupancies up to and including four stories in height. 1.1.1 This standard assumes that the sprinkler system shall be designed to protect against a fire originating from a single ignition location.

1.1 Scope. 1.1.1 This standard provides the minimum requirements for the design, installation, and system acceptance testing of water spray fixed systems for fire protection service and the minimum requirements for the periodic testing and maintenance of ultra high-speed water spray fixed systems. 1.1.2* Water spray fixed systems shall be specifically designed to provide for effective fire control, extinguishment, prevention, or exposure protection. 1.1.3* This standard shall not apply to water spray protection from portable nozzles, sprinkler systems, monitor nozzles, water mist suppression systems, explosion suppression, or other means of application covered by other standards of NFPA.

1.1 Scope. 1.1.1 This standard covers the minimum requirements for the installation of standpipes and hose systems. 1.1.2* This standard does not cover requirements for periodic inspection, testing, and maintenance of these systems. A.1.1.2 See NFPA 25, Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems.

1.1* Scope. A.1.1 For more information, see NFPA 25, Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems, and NFPA 70, National Electrical Code, Article 695. 1.1.1 This standard deals with the selection and installation of pumps supplying liquid for private fire protection. 1.1.2 The scope of this document shall include liquid supplies; suction, discharge, and auxiliary equipment; power supplies, including power supply arrangements; electric drive and control; diesel engine drive and control; steam turbine drive and control; and acceptance tests and operation. 1.1.3 This standard does not cover system liquid supply capacity and pressure requirements, nor does it cover requirements for periodic inspection, testing, and maintenance of fire pump systems. 1.1.4 This standard does not cover the requirements for installation wiring of fire pump units.

This standard shall cover the design, installation, and maintenance of automatic sprinkler systems for protection against the fire hazards in one- and two-family dwellings and manufactured homes. 1.1.2 This standard assumes that the sprinkler system is designed to protect against a fire originating from a single ignition location.

The 2009 edition of the Uniform Plumbing Code© (UPC) represents the most current approaches in the plumbing field. It is the third edition developed under the ANSI Consensus process is designated as an American National Standards by the American National Standards Institute (ANSI). Contributions to the content of this code were made by every segment of the built industry, including such diverse interests as consumers, enforcing authorities, installers/maintainers, labor, manufacturers, research/standards/ testing laboratories, special experts and users.

1.1* Scope. This document establishes the minimum requirements for the periodic inspection, testing, and maintenance of water-based fire protection systems, including land-based and marine applications.

1.1 Scope. 1.1.1 This standard shall cover the minimum requirements for the installation of private fire service mains and their appurtenances supplying the following: (1) Automatic sprinkler systems (2) Open sprinkler systems (3) Water spray fixed systems (4) Foam systems (5) Private hydrants (6) Monitor nozzles or standpipe systems with reference to water supplies (7) Hose houses 1.1.2 This standard shall apply to combined service mains used to carry water for fire service and other uses. 1.1.3 This standard shall not apply to the following situations: (1) Mains under the control of a water utility (2) Mains providing fire protection and/or domestic water that are privately owned but are operated as a water utility 1.1.4 This standard shall not apply to underground mains serving sprinkler systems designed and installed in accordance with NFPA 13R that are under 4 in. (102 mm) in size. 1.1.5 This standard shall not apply to underground mains serving sprinkler systems designed and installed in accordance with NFPA 13D.